Building Regulations for Replacement Windows and Doors: What You Need to Know

Replacement windows and doors are covered by building regulations. Here is what that means, why the certificate matters and what a good installer takes care of.
Window installer measuring a window frame

Building Regulations for Replacement Windows and Doors: What You Need to Know

Many homeowners are surprised to learn that replacing windows and external doors is covered by building regulations in England. You do not usually need planning permission, but the new windows and doors must meet certain standards for energy efficiency, ventilation, safety and, in some rooms, fire escape. Here is a plain-English guide to what applies and why it matters when you come to sell your home.

This is general guidance for homes in England. Rules can change, and listed buildings and some other properties have extra requirements, so always check if you are unsure.

Do I need planning permission?

In most cases, replacing windows and doors in a house does not need planning permission, as long as the new ones are similar in appearance to the old ones. Planning permission may be needed for listed buildings, flats, properties in conservation areas with Article 4 directions, or where you are making significant changes, such as new openings or very different styles. Building regulations are a separate matter and apply either way.

Competent person schemes: FENSA and Certass

The simplest way to make sure replacement windows and doors meet building regulations is to use an installer registered with a competent person scheme, such as FENSA or Certass. Registered installers can self-certify that their work complies. After the job, the installation is registered and you should receive a certificate.

If you use an installer who is not registered, you would normally need to apply to your local authority building control for approval, which takes extra time and costs money.

Why the certificate matters

When you sell your home, the buyer’s solicitor will usually ask for proof that any windows and doors replaced since 2002 comply with building regulations. The certificate is that proof. Without it, you may need to arrange a retrospective application or an indemnity policy, which can delay a sale. Keep the certificate with your house documents. If you have lost it, you can often obtain a copy from the scheme.

What the regulations cover

Energy efficiency

Replacement windows must meet minimum energy-efficiency standards. In England, this currently means a whole-window U-value of 1.4 W/m²K or better, or a Window Energy Rating of band B or better. Replacement external doors also have energy requirements. Our article on window energy ratings and U-values explains these figures.

Ventilation

Replacing windows must not make the ventilation in a room worse than it was before. If the old windows had trickle vents, the new ones should have them too, and current guidance generally recommends that replacement windows include background ventilation such as trickle vents. Good ventilation helps prevent condensation and damp, as covered in our article on condensation on windows.

Means of escape

Some windows are needed as an emergency escape route in case of fire. In general, habitable rooms on the first floor, and rooms in loft conversions, may need an escape window with a large enough opening and a suitable height from the floor. When you replace a window that was an escape window, the replacement should provide at least the same means of escape. A good installer will check this when measuring up.

Safety glass

Glass in certain “critical locations” must be safety glass, such as toughened or laminated glass, to reduce the risk of injury if someone falls against it. This generally includes glass in and around doors, and low-level glazing close to the floor. See our guide to toughened vs laminated glass.

Structural support

If an opening is widened, or a bay window is replaced, the installer must make sure the structure above is properly supported. Some older bay windows carry part of the load of the wall above, and this needs to be taken into account.

Security in new homes

New homes must meet security requirements for doors and windows. While these rules do not apply in the same way to replacements in existing homes, choosing products tested to recognised standards is a good idea. Read more in our article on front door security.

What a good installer should do

  • Survey and measure each opening properly
  • Check which windows need to provide a means of escape
  • Specify safety glass where it is required
  • Include trickle vents where needed
  • Make sure products meet the energy-efficiency requirements
  • Register the installation with the competent person scheme so you receive a certificate

Questions to ask before you sign

  • Are you registered with FENSA, Certass or another competent person scheme?
  • Will I receive a compliance certificate after installation?
  • Which windows will be escape windows, and will they meet the requirements?
  • Where will safety glass be used?
  • Will the windows include trickle vents?

Frequently asked questions

Do I need building regulations approval to replace a single window?

Yes. The rules apply whether you replace one window or all of them.

Does repairing a window or replacing the glass need approval?

Repairs, and replacing only the glass in an existing frame, generally do not need building regulations approval. Safety glass rules still apply in critical locations.

What happens if I do not have a certificate when I sell?

Your solicitor may suggest a retrospective application to building control or an indemnity insurance policy. It is easier to keep the certificate safe in the first place.

Replacement windows and doors in Bolton

Luxe Windows supplies and fits uPVC windows and doors across Bolton, Bury, Wigan, Stockport and the North West. Call 01204 929995 for a free survey and quote.

Request a Free Quote

Call us on 01204 929995 or fill out the form below to receive your free, no-obligation quote

Windows & Doors Services

Scroll to Top